Easy Dead Bolt 57mm

£0.00

Clear
Product Code: N/A Categories: ,

Product Description

The Easy Dead Bolt is three times quicker to fit than a traditional bolt. Supplied with two strike plates to be used depending on whether you are installing a new door or using an existing door. With a 57mm spindle centre it requires only one 26mm drill bit for fitting and carries a 1 year guarantee

Works well with the Easy Click door handle range

Fitting Instructions for Urfic’s Easy Latch and Dead Bolt

  • Mark required height on the door and frame
  • Use a set square to mark a horizontal line on leading door edge
  • Transfer height line to edge of door and frame (or as first point)
  • Mark vertical centre line of the door and frame to create an intersection (cross)
  • Use a 26mm flat head drill bit
  • Keep drill straight and at 90 degrees-drill out hole
  • Mark position of the spindle keeping drill straight/90 degrees-drill out hole
  • Check the latch direction is correct (curve of latch head should face the frame)
  • Insert latch into predrilled hole by pushing the round plate against the timber (check flush with door edge)

How To Fit A Strike Plate (New Door)

  • With a 32mm bit, drill a hole 17mm deep at point of intersection (marked X)
  • Check hole depth-do not drill more than 17mm
  • Secure with fixings provided
  • Position strike plate over the top
  • Secure the strike plate with the fixings supplied
  • Check strike plate is flush with frame

How To Fit A Strike Plate (Existing Door)

  • Remove existing product
  • Insert plastic rectangular casing
  • Adjust position/reshape woodwork
  •  Position fixing plate
  • Secure with fixings provided

Additional Information

Finish

Polished Nickel, Satin Nickel

If you would like to find out more information about this product then please get in touch using the form below.